加州CEC能源法規認證新資訊
加州法令的能源等級新規格(06年7月版附件)已出臺,產品在設計產品標簽時除了要標示等級3,4標志以外,如果只測115V或230V測不過的情況下,還要在標志的右側有"115V"的標志
全部回復(21)
正序查看
倒序查看
于兄, 謝謝你的訊息.
看到感到有些奇怪, 再對 CCR 1601 才發現, 自己讀標準又只讀一半.
1607 Marking of appliance
1607 (d)(9)(i)(a) 及 (b)
“III” for those models certified under Section 1606 as complying with the standards effective January 1, 2007 for external power supplies used with laptop computers, mobile phones, printers, print servers, scanners, personal digital assistants (PDAs), and digital cameras. Effective July 1, 2007 for external power supplies used with wireline telephones and all other applications as indicated in Table U-1 of this Article, but not as complying with the standards effective July 1, 2008 in Table U-2 of this Article. For models that are able to operate at both 115 volts/60 Hz and 230 volts/50 Hz, but show compliance only at 115 volts, the Roman numeral “III” marking
shall include a reference to “115V”, as shown in the following example: III 115V.
b. “IV” for those models certified under Section 1606 as complying with the standards effective July 1, 2008 in Table U-2 of this Article. For models that are able to operate at both 115 volts/60 Hz and 230 volts/50 Hz, but show compliance only at 115 volts, the Roman numeral “IV” marking shall include a reference to “115V”, as shown in the following example: IV 115V
之前只看了 1605 (u)(3) The efficiency in the active mode of power supplies when tested at 115 volts at 60 Hz. 就誤以為只要測 115 V 就 OK. 不需變動標示.
真是三人行有我?guī)?.. 受教了.
看到感到有些奇怪, 再對 CCR 1601 才發現, 自己讀標準又只讀一半.
1607 Marking of appliance
1607 (d)(9)(i)(a) 及 (b)
“III” for those models certified under Section 1606 as complying with the standards effective January 1, 2007 for external power supplies used with laptop computers, mobile phones, printers, print servers, scanners, personal digital assistants (PDAs), and digital cameras. Effective July 1, 2007 for external power supplies used with wireline telephones and all other applications as indicated in Table U-1 of this Article, but not as complying with the standards effective July 1, 2008 in Table U-2 of this Article. For models that are able to operate at both 115 volts/60 Hz and 230 volts/50 Hz, but show compliance only at 115 volts, the Roman numeral “III” marking
shall include a reference to “115V”, as shown in the following example: III 115V.
b. “IV” for those models certified under Section 1606 as complying with the standards effective July 1, 2008 in Table U-2 of this Article. For models that are able to operate at both 115 volts/60 Hz and 230 volts/50 Hz, but show compliance only at 115 volts, the Roman numeral “IV” marking shall include a reference to “115V”, as shown in the following example: IV 115V
之前只看了 1605 (u)(3) The efficiency in the active mode of power supplies when tested at 115 volts at 60 Hz. 就誤以為只要測 115 V 就 OK. 不需變動標示.
真是三人行有我?guī)?.. 受教了.
0
回復
@mikesu
于兄,謝謝你的訊息.看到感到有些奇怪,再對CCR1601才發現,自己讀標準又只讀一半.1607Markingofappliance1607(d)(9)(i)(a)及(b)“III”forthosemodelscertifiedunderSection1606ascomplyingwiththestandardseffectiveJanuary1,2007forexternalpowersuppliesusedwithlaptopcomputers,mobilephones,printers,printservers,scanners,personaldigitalassistants(PDAs),anddigitalcameras.EffectiveJuly1,2007forexternalpowersuppliesusedwithwirelinetelephonesandallotherapplicationsasindicatedinTableU-1ofthisArticle,butnotascomplyingwiththestandardseffectiveJuly1,2008inTableU-2ofthisArticle.Formodelsthatareabletooperateatboth115volts/60Hzand230volts/50Hz,butshowcomplianceonlyat115volts,theRomannumeral“III”markingshallincludeareferenceto“115V”,asshowninthefollowingexample:III115V.b.“IV”forthosemodelscertifiedunderSection1606ascomplyingwiththestandardseffectiveJuly1,2008inTableU-2ofthisArticle.Formodelsthatareabletooperateatboth115volts/60Hzand230volts/50Hz,butshowcomplianceonlyat115volts,theRomannumeral“IV”markingshallincludeareferenceto“115V”,asshowninthefollowingexample: IV115V之前只看了1605(u)(3)Theefficiencyintheactivemodeofpowersupplieswhentestedat115voltsat60Hz.就誤以為只要測115V就OK.不需變動標示.真是三人行有我?guī)?..受教了.
長學問了.謝謝.
另請問大家有沒有發現可以一次性判斷產品是否符合CEC的儀器?或者有沒有誰能提供生產中測試CEC的好辦法?
另請問大家有沒有發現可以一次性判斷產品是否符合CEC的儀器?或者有沒有誰能提供生產中測試CEC的好辦法?
0
回復
@wqh002
知道是按標準去測.但想想分別帶100%,75%,50%,25%負載要測試負載電壓,電流,然後還要計算效率.我想沒有哪個廠在生產拉上會這麼去測試,因?yàn)榛ㄔ跍y(cè)試上的時間太多了.是否有專門為CEC開發的儀器,可以測出平均效率,而不必去算.
請教一下,CEC寬電壓不是兩者都要通過,不管是115還是230,如果其中有一無法通過就不能發報告的嗎,為何與樓主的講法不一樣.望賜教,謝謝!!!
0
回復
@wqh002
請問三樓兄弟,CCR1601是什么?是不是CEC標準的名稱.能否把CEC標準傳給我一份.wqh002@163.com謝謝.
共享一下最新的CEC標準:1162950895.pdf
0
回復
